Vulcan C24EA6 Manuel d'utilisateur télécharger pdf (Page 30)

MODEL C24EA - SWITCHES, SOLENOIDS, RELAY, AND BUZZER

F35453 (July 2008) Page 30 of 68

COMPARTMENT STEAM

SOLENOID

1. Turn off machine to drain steam generator.

Allow steamer to complete drain cycle.

2. Remove RIGHT SIDE BASE PANEL as

outlined under COVERS AND PANELS.

3. Locate compartment steam solenoid connected

to cooking compartment.

4. Disconnect electrical wiring to solenoid coil.

5. Disconnect steam hose from the outlet side of

solenoid.

NOTE: Use new band clamps when connecting

hoses. See TOOLS.

6. Remove solenoid from steam supply manifold.

A. Remove pipe fittings from solenoid.

7. Reassemble parts removed in reverse order.

Apply pipe thread sealant to pipe threads before

installation.

8. Check steamer for proper operation.

TIME DELAY RELAY

1. Turn off machine to drain steam generator.

Allow steamer to complete drain cycle.

2. Remove FRONT BASE PANEL as outlined

under COVERS AND PANELS.

3. Note electrical connections for the time delay

relay then disconnect lead wires from relay.

4. Remove screw securing relay to low voltage

control box then remove relay.

5. Reassemble parts removed in reverse order.

6. Check steamer for proper operation.

NOTE: When installing, ensure time delay knob is

rotated fully CCW to the lowest setting (approx. 2

seconds). Remove jumper wire for proper operation

at steamer control circuit voltage (120VAC).

LOWER COMPARTMENT SOLENOID SHOWN

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

Pas de commentaire

Vulcan C24EA6 Manuel d'utilisateur Page 30