Vulcan 1ER50A Manuel d'utilisateur télécharger pdf (Page 10)

ERA & EBD SERIES ELECTRIC FRYERS - REMOVAL AND REPLACEMENT OF PARTS

6. Reverse procedure to install.

LIFT ASSIST SPRINGS

NOTE: If one spring breaks, replace both springs.

1. Raise heating elements and place 2x4 lumber

under them for support. Heating elements are

to remain upright.

2. Loosen all eye bolt mounting nuts to release

tension on springs.

3. Remove lift assist springs from the eye bolt

hooks.

4. Remove lift assist springs from the hangers.

5. To install springs:

A. Attach spring hook to hanger thru rear

door opening.

B. Attach spring hook to eye bolt and tighten

eye bolt mounting nut.

C. Remove 2x4 lumber and lower heating

elements.

6. Adjust spring tension as outlined under LIFT

ASSIST SPRING ADJUSTMENT in SERVICE

PROCEDURES AND ADJUSTMENTS.

F25385 (May 2010) Page 10 of 32

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Commentaires sur ces manuels

Pas de commentaire