Vulcan 1VK45A Manuel d'utilisateur télécharger pdf (Page 17)

Fig. 29

4. Remove bolts and remove burner from fryer.

Fig. 30

5. Reverse procedure to reinstall burner.

GAS VALVE

Disconnect the

electrical power to the machine and

follow lockout / tagout procedures.

Shut off the gas before servicing the

unit.

All gas joints disturbed during

servicing must be checked for leaks. Check with a

soap and water solution (bubbles). Do not use an open

flame.

The gas valve is considered part of the burner

assembly. If the gas valve fails and needs to be

replaced, you must order a complete blower/gas valve

assembly (burner). The reason for this is every blower/

gas valve assembly (burner) is set up at the factory to

operate at the most efficient level possible. This set up

procedure cannot be duplicated in the field. If you feel

that the gas valve is not set up correctly or not

operating correctly, call product service and they will

help solve the problem.

BASKET LIFT TUBE

Disconnect the

electrical power to the machine and

follow lockout / tagout procedures.

1. Remove

BASKET LIFT COVERS.

2. Remove nut securing lift bar to lift tube.

3. Remove screws securing lift tube bracket to fryer

then remove bracket and lift tube.

VK and TR GAS FRYERS W/Wo KleenScreen PLUS - REMOVAL AND REPLACEMENT OF PARTS

Page 17 of 55 F45474 (0413)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 54 55

Pas de commentaire

Vulcan 1VK45A Manuel d'utilisateur Page 17