Vulcan 1VK45A Manuel d'utilisateur télécharger pdf (Page 26)

Fig. 48

3. Remove the red flame sense wire.

4. Place one Microamp meter lead on the red wire.

5. Place the other meter lead on the terminal you

removed the red flame sense wire from.

6. Power up the fryer and have it call for heat.

7. You should receive a minimum Microamp

reading of at least 1.0 microamp.

8. If the reading is greater or equal to the value

given, then the flame sense current is within

tolerance.

9. If the reading is lower than the value given, then

troubleshoot the flame sense circuit.

NOTE: If the reading is below 0.0 microamps, reverse

the meter leads and take another reading.

FLAME SENSE CURRENT CHECK

AFTER 12/1/12

Certain procedures in this section

require electrical test or measurements while power is

applied to the machine. Exercise extreme caution at

all times. If test points are not easily accessible,

disconnect power and follow lockout / tagout

procedures, attach test equipment and reapply power

to the test.

1. Remove cover from power supply box.

2. Locate two pins (FC- and FC+) on side of the

ignition/ blower control board.

Fig. 49

3. Set your multi meter for Microamps and place

meter leads on two pins.

4. Restart the fryer and read the microamps as the

fryer is sparking.

NOTE: The only time you will be able to read the

microamps is when the fryer is sparking. When the

spark quits the reading will go away. You may only

have several seconds to obtain this reading.

5. The flame sense current must be at least 2.0 to

3.0 microamps, and the reading must be steady.

6. If reading is below 1.3 microamp or unsteady,

check pilot flame and electrical connections.

ELECTRONIC IGNITION CONTROL

NOTE: This procedure applies to all fryers.

Ignition Module Lockout

This happens when fryer is unable to detect flame

sense. The electrode will try to ignite one time. When

VK and TR GAS FRYERS W/Wo KleenScreen PLUS - SERVICE PROCEDURES AND ADJUSTMENTS

F45474 (0413) Page 26 of 55

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 54 55

Commentaires sur ces manuels

Pas de commentaire

Vulcan 1VK45A Manuel d'utilisateur Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Friteuses Vulcan 1VK45A